Flamort Latex Intumescent
Fire Retardant Paint
CA. REG. #C-00414

Flamort Latex Intumescent Paint is an intumescent coating combining fire protection and excellent quality. The paint is applied by brushing, rolling, or spraying to interior surfaces drying to a flat finish. For public buildings, schools, hospitals, nursing homes, homes, hotels, motels, farms, churches, ships, restaurants, and industry.

SURFACE PREPARATION: Surfaces should be clean, free of dirt, grease and oil. Wire brush to remove chalky or loose paint. Use a latex primer on porous surfaces.
APPLICATION: Stir well and apply at package consistency. Paint by brush, roller, or spray. If thinning is necessary, use small amount of tap water. Allow at least 4 hours between coats. See chart application rates.

TEMPERATURE: For best results, do not apply when temperature is below 50 degrees F. PROTECT FROM FREEZING.

CAUTION: Do not take internally. Wash thoroughly after handling. Close container after each use. Use only in a well ventilated area. For additional safety information, consult Material Safety Data Sheet.

Keep out of reach of children.

Approvals:

California State Fire Marshal (Reg. No. C-00414)
International Conference of Building Officials #2900
City of Los Angeles Report #23922